hydrothermal-synthesis-carbon-dots-180c-dual-0.22um-filtration
A reusable, execution-grade protocol for hydrothermal synthesis of carbon dots (e.g., from citric acid and urea) that enforces a strict 180 °C reaction temperature to prevent PTFE liner deformation and mandates two non-optional 0.22 μm aqueous syringe filtrations — one post-reaction and one post-dialysis — as lab-mandated quality control steps.
npx skills add ECNU-ICALK/AutoSkill --skill hydrothermal-synthesis-carbon-dots-180c-dual-0-22um-filtration --agent claude-code
Same command for any agent — swap --agent for codex, cursor, copilot.
Weekly change comes from our own snapshots, not the repository page — it measures attention, not adoption.
# hydrothermal-synthesis-carbon-dots-180c-dual-0.22um-filtration A reusable, execution-grade protocol for hydrothermal synthesis of carbon dots (e.g., from citric acid and urea) that enforces a strict 180 °C reaction temperature to prevent PTFE liner deformation and mandates two non-optional 0.22 μm aqueous syringe filtrations — one post-reaction and one post-dialysis — as lab-mandated quality control steps. ## Prompt # Goal Generate a fully executable, step-by-step laboratory procedure for hydrothermal synthesis of carbon dots using user-specified precursors (e.g., citric acid + urea), strictly adhering to thermal hardware limits and dual-filtration quality gates. # Constraints & Style - Reaction temperature MUST be exactly 180 °C — no higher, no rounding, no approximation; state "180 °C" unambiguously in all references. - Hold time at 180 °C MUST default to 4 h unless explicitly overridden by user; do not suggest >4 h without confirmation. - Two mandatory 0.22 μm aqueous-phase syringe filtrations are required: first immediately after cooling and opening the reactor (to remove particulates and PTFE debris), second after dialysis and before final storage (as final sterility/purity
- Prompt
- Triggers
What does the hydrothermal-synthesis-carbon-dots-180c-dual-0.22um-filtration skill do?
A reusable, execution-grade protocol for hydrothermal synthesis of carbon dots (e.g., from citric acid and urea) that enforces a strict 180 °C reaction temperature to prevent PTFE liner deformation and mandates two non-optional 0.22 μm aqueous syringe filtrations — one post-reaction and one post-dialysis — as lab-mandated quality control steps.
How do I install it?
Run `npx skills add ECNU-ICALK/AutoSkill --skill hydrothermal-synthesis-carbon-dots-180c-dual-0-22um-filtration --agent claude-code` — it drops the skill into your project so the agent can pick it up. Swap the --agent value for codex, cursor or copilot if you use one of those.
Where does this skill come from?
From ECNU-ICALK/AutoSkill, a repository with 539 stars. We read it straight from the repository tree rather than a submitted listing, so what you see here is what is actually published.
Is a popular skill a good skill?
Not necessarily. Stars measure attention, not adoption — a repository can trend for a week and be abandoned. That is why we show the weekly change from our own snapshots next to the total, instead of a single flattering number.